Installation Instructions:

Before installing your SunBlock Top, you must make sure that your kennel is set up correctly. If you have purchased a pre-assembled kennel, the gate panel and back panel must be positioned to the inside of the side panels.

Step 1: Using the enclosed cable ties, LOOSELY attach the SunBlock Top at the middle grommets of each side.

Step 2: Working from the center of each side, LOOSELY attach each grommet with a single cable tie. Attach each grommet except the corner grommets.

Step 3: Hand tighten all cable ties equally and cut off excess.

Step 4: Once this is completed, the corner grommets may be attached.

Note: If your area is subject to heavy snow, it is recommended that you remove the SunBlock Top during the winter months. Heavy snow can collapse the kennel resulting in damage and injury.

Available Sizes: (please indicate size when ordering)